Firetex FX5090
Intumescent Coating For Structural Steelwork

• A water based TCEP free thin film site applied basecoat intumescent coating for dry internal structural steelwork
• Fire resistance for periods of up to 120 minutes on structural steel.
• This product has been tested and assessed in accordance with the ASFP fire testing protocol for cellular beam protection
• Certifire Approved – Certificate CF5188
• Highly competitive loadings
• Easy application properties
• Topseal is not required, however, where a finish colour has been specified we can supply a suitable topseal available in a wide range of BS4800 or RAL colours

Data Sheets
FX5090 Data Sheet
FX5090 Safety Data Sheet

Recommended Topcoats
If it can be guaranteed that application and subsequent in-service conditions will be in a C1 environment as defined in ISO 12944-2:1998, then no topcoat is required.

Sher-Cryl M770
FIRETEX M71V2
Acrolon C137V2
Acrolon C237 
The above products should be used for subsequent re-decoration.

All orders are usually despatched within 24hrs of receiving cleared payment (Mon - Fri). 

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.