A water based acrylic intumescent sealant available in 310ml cartridges or 600ml foil packs. Typically used to provide a flexible seal to joints in blockwork or head of wall requiring movement capability...

Nullifire FS702 Intumastic Nullifire FS702 Intumastic is a one-part fire resistant acrylic joint sealant. Nullifire FS702 cures to give a firm, but flexible seal in low movement fire rated joints to seal...

Intuputty Pads have been designed to maintain the fire resistance of gypsum walls when breached by electrical switches and sockets. Intuputty Pads are non-setting flexible intumescent pads based on a silicone...

FO100 Putty Pads are an easy to apply fire and sound rated seal supplied as a non-setting putty. The pad is hand workable, re-useable and re-serviceable due to its non-setting properties. When electrical...

Hinge & Lock Protectors Fire door upgrades Intumescent Hinge & Lock Protectors (set of 3) Fireplug CFPM can also be used between...

Protecta FR Graphite is a water based fire classified sealing compound that contains a high concentration of heat expanding graphite material. This compound may be used in more extreme transits than FR...

Intumescent Fire & Smoke Door Set Product Features Intumescent fire and smoke seals are for fitting into a rebate on the fire door or frame so that, when subjected to heat, it...

Intumescent Strip, Fire Only Door Set Product Features Intumescent fire and smoke seals are for fitting into a rebate on the fire door or frame so that when subjected to heat,...

Protecta FR Pipe Collars Up To 2 Hours - Red Protecta FR Pipe Collars consists of a split red coated, circular steel casing designed to fit around plastic pipes. All collars have a secure and simple locking...

Protecta FR Pipe Collars Up To 2 Hours - WHITE Protecta FR Pipe Collars consists of a split white coated, circular steel casing designed to fit around plastic pipes. All collars have a secure and simple...

Protecta FR Putty Cord is an easy to apply, fire rated putty supplied as a non-setting cord. Fitting the putty cords will reinstate the fire rating of the partition and prevent the passage of smoke and...

CE Marked Up to 4 Hours Features & Benefits Tested to BSEN 1366-3: 2009 Classified according to EN 13501-2: 2007 + A1: 2009 CE Marked Up to 4 hour fire rating Suitable for PVC, PVC-U, PE, HDPE, MDPE &...

Firetherm Intucollar - 55mm Designed to maintain the fire resistance and seal plastic (PVC-U, PP, PE, HPE & ABS) combustible pipes as they pass through fire compartment walls and floors. Under fire conditions,...

55mm - FP170 has been tested with combustible pipes (PVC, PE, PP, SanPVC, Bevex, etc.), insulated noncombustible pipes (steel) and network cable bundles (up to 125 mm). Typically testing is carried out...

110mm Safire Pipe Collars are made from steel / stainless steel with an intumescent lining and are designed to maintain the fire resistance of fire rated walls and floors where these are breached by service...

Fire Blankets High quality woven fibreglass silicon coated fire blanket with a kevlar hem folder in to a quick release heavy duty box with strong end cap fitting. Tested and Kitemarked to BSEN 1869. Typically...

Solvent-borne A solvent-borne durable gloss finish for use over suitably prepared interior and exterior joinery and metal work. Full Gloss has excellent opacity and film-build, gloss and colour retention....

Firetherm Intucollar - 110mm Designed to maintain the fire resistance and seal plastic (PVC-U, PP, PE, HPE & ABS) combustible pipes as they pass through fire compartment walls and floors. Under fire conditions,...

110mm Nullifire FP170 Pipe Collar Benefits Up to 2 hours fire resistance Surface mounted system Lightweight and easy to install Design allows for thermal movement of the pipe Fixing brackets mechanically...

CE Marked Up to 4 Hours Features & Benefits Tested to BSEN 1366-3: 2009 Classified according to EN 13501-2: 2007 + A1: 2009 CE Marked Up to 4 hour fire rating Suitable for PVC, PVC-U, PE, HDPE, MDPE &...

Available in 20L & 15L - Ex Mortar Protecta EX Mortar is a dry white powder which consists of inorganic components and perlite. When water is added, a hardened thermal fire sealing compound for sealing...