Envirograf HW Enviro Water-Based Top Coat
HW Enviro Clear/White is a specially formulated, quick drying, water based protective top coating for INTERNAL smooth hardwood and softwood surfaces. It can be applied by brush, roller, or spray and it comes in either a satin or gloss finish.
Can be used over the top of the following products: HW02 Clear HW01 White
Application & Coverage:
HW Enviro Clear does not need thinning. Stir well before application. The result is dependent on the condition of the surface and temperature of application. The coverage rate is 10-12m² per litre, For hardwearing areas apply 2 coats.
Product Data Sheet
Safety Data Sheet
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.