Fire Resistant Pipe Collar

PipeBloc PCP Pipe Collars are an intumescent composite based on graphite intumescent and designed to provide a high volume expansion and pressure seal.
The PipeBloc PCP Achieved EI120 being tested to EN 1366-3, with a maximum diameter of 250mm and with a shell depth of 30 and 40mm.
The PipeBloc PCP can be installed in flexible wall, rigid wall and floor constructions and is compatible with polypropylene (PP), polyethylene (PE) and PVC pipes.

 Tested with various end capping configurations both uncapped U/U and capped U/C & C/U pipes.

• CE Marked 
• Certifire CF 5367
• Coated Steel and Stainless Steel shell with intumescent insert
• Fire Resistance testing to EN 1366-3 EI30, EI60, EI90, EI120, EI240
• Tested to BS476 20 & 22
• Pipe sizes from 32mm to 250mm
• End Capping – Uncapped U/U and Capped U/C & C/U pipes
• 3 Fixing Tabs
• Compatible with PP, PE, PVC-V, ABS, SAN & PVC Pipes

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.