Sherwin Williams Macropoxy C88
A high Performance 2-pack multi purpose tolerant epoxy
A single coat shop applied protective finish for structural steel
that will not normally require further site coats.
Suitable for use in marine, chemical or other aggressive environments, but not immersed conditions.
% Solids By Volume: 79
Dry Film Thickness: 125
Recommended application Methods:
Sherwin Williams Cleanser/Thinner
No. 5 For thinning and cleaning
A two component material supplied in separate containers to be mixed prior to use.
20Litre (5.3 gal) and 5 Litre (1.3 gal) units when mixed
1.465 kg/litre (14.7lb/gal) may vary with shade
PRODUCT DATA SHEET
SAFETY DATA SHEET - ADDITIVE
SAFETY DATA SHEET - BASE
Other colours available on request.
Please let us know the BS or RAL number you require when you reach the checkout.
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.