firetherm Intubatt 3
£31.68 inc. tax

£26.40 ex. tax
? Tax based on United Kingdom.
firetherm Intubatt 3 Summary

firetherm Intubatt 3


Intubatt 3 is supplied pre-configured, ablative coated on a single side and factory cured, Intubatt 3 is a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal. Intubatt 3 has a 7.5% overall movement capability.

Size: 1200 x 600 x 100 mm
Weight: 8 kg (+/- 0.5 kg) (0.72 m2 )
Density: 100 kg/m3 nominal
Colour: off white
Ablative coating: 1 mm factory applied and cured with Optifire tracers.
Seal in joints up to 200mm without support

œLow cost and simple install
œFully tested at Exova BM Trada to BS EN 1366-4 and BS 476/20/22 to achieve up to 4 hours integrity
Easy to cut

Please click here for product data sheet
Please click here for material safety data sheet

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.  

Product Condition:
Product Added to your Cart

-------- OR --------