63mm Stopseal Pipe Collar
FSSPC63
£7.50 inc. tax

£6.25 ex. tax
? Tax based on United Kingdom.
63mm Stopseal Pipe Collar Summary

63mm Stopseal Pipe Collar



63mm Stopseal Pipe Collar
 

 



Pipe Collars are intumescent composites based on graphite intumescent and designed to provide high volume expansion and pressure seal. 

           

The Stopseal Pipe Collar is tested to BS 476 part 20 giving fire resistance of up to 2 hours when used on UPVC, PVC, polypropylene and steel pipes.  The collars are available in several sizes and are suitable for use on pipes from 40mm to 160mm diameter to prevent the passage of fire between compartment walls and floor.

 

The advantages of the Stopseal Pipe Collar are as follows:

 

·                     Suitable for use within walls and floors either face mounted or internal.

·                     Allows thermal and mechanical movement of pipe.

·            Ease of fixing to suit pipe location.

·                     Halogen free, contains no asbestos, ceramic and is environmentally friendly.

·            Not effected by fungus, vermin or rodents.

·                      Long life.

 

SIZE AND FIRE RATING

 

Pipe Diameter

 

40mm

 

55mm

 

82mm

 

110mm

 

160mm

Wall (wall side only on fire side)

 

2 hours

 

2 hours

 

2 hours

 

2 hours

 

2 hours

Floor (Underside)

 

2 hours

 

2 hours

 

2 hours

 

2 hours

 

2 hours


SPECIFICATION

Fire Resistance:             2 hours – BS 476 PART 20

Expansion Rate:             20:1

Working Temperature:   -20ºC to + 140ºC

Colour / Appearance:      Silver Stainless Steel

Fixing Detail:                   4 No 75mm x 6mm Rawl Bolts

INSTALLATION

Installation details and technical support are available from our technical department.  Full data sheets and MSDS are provide with all our products.

 

  • Place collar around pipe and hold in place using the slide clip.
  • Slide into place
  • Fix using rawl bolts or heavy-duty screws, for partitions use 8mm spring toggles or straight through fixing if 2 collars are to be used.
  • NO PLASTIC or COMBUSTIBLE FIXING MAY BE USED.
  • See installation manual for further fixing methods.

 COMPLIANCE

Stopseal Pipe Collars are manufactured in the EU, meeting the highest quality standards in compliance with ISO EN 9001. 


STORAGE AND DISPOSAL


The collars should be stored indoors ideally between +5 to +30ºC in dry conditions. There is no requirement for a shelf life period.

Please Click Here for the Product Data Sheet

Please Click Here for the Health and Safety Data Sheet

The pipe collar is supplied with all the necessary approvals needed to satisfy a Fire Officer. 


All orders are usually despatched within 24hrs of receiving cleared payment (Mon - Fri).  

Brand:
Stopseal
weight:
340
Product Condition:
New
Product Added to your Cart
x

-------- OR --------