Trowel/Spray Grade Sealant
FabStop AM Trowel Grade™
Trowel Grade Intumescent Sealant
FabStop AM Trowel Grade coating has been developed to use on FabStop Fire Batt boards. Once the ablative coating is applied it prevents the passage of fire and smoke between fire rated compartments providing up to a 4-hour fire rating.
At normal temperatures, FabStop ablative coating remains flexible to permit thermal and mechanical movement of the services. The product is unaffected by oil, fungus, vermin, contains no halogens or asbestos and contains no VOCs.
The advantages of the FabStop ablative coating are as follows:
* Fire rated to BSEN1366-3 & BS476 part 20
* Water based acrylic coating
* Fire and smoke seal
* Halogen free
* Resists fungi and vermin
* Excellent adhesion quality
Areas of usage should typically be sealing of joints, voids and irregular holes in partitions, fire walls and other structure elements. The product can be used as part of the FabStop Fire Batt system.
This product is delivered with full health and safety information and data sheet. All of our products are fully tested meeting the highest quality standards.
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.