HR-Prof 20 Litre
HR-Prof20
RRP £338.89
£366.00 inc. tax

£305.00 ex. tax
? Tax based on United Kingdom.
HR-Prof 20 Litre Summary

HR-Prof 20 Litre

 

HR-Prof

Clear Flame Retardant For Timber
HR-Prof is suitable for internal and external timber.  It has non-flammable properties which restrict ignition and the spread of flame.  The product is easy to apply, possessing high diffusion properties enabling it to quickly penetrate into the surface of the substrate. 

HR-Prof is typically used on cladding, log cabins, garages, summer houses, staircases, bathrooms, saunas and pool enclosures.  Critical engineering properties i.e. strength, durability, hygroscopicity and corrosivity are not compromised.

HR-Prof is renowned as a market leading flame retardant for timber having been applied to many prestigious projects including the Olympic Stadium.   


Product benefits include:
  • Fully tested on a range of timber substrates 
  • Fire properties will remain active for the lifetime of the substrate
  • Ecologically friendly
  • Non-toxic
  • Solvent free
  • For internal and external use
  • Not broken down by water or humidity
  • Does not leach
  • Anti-fungicidal properties
  • Final finish can be left natural or over-coated with certain stains, varnish and paint

Data Sheet

Please click here for further information and application data sheet for HR-Prof Flame Retardant 

Testing Information

Certification: BS EN 13823 & BS EN 11925-2 SBI Euro class B-s1-d0 (equivalent to UK Class 0, BS467:Part6 & BS476:Part7).

It is imperative when selecting a flame retardant for timber that it has been fully tested on the substrate in question.  For this reason HR-Prof has been tested on a wide range of timber substrates including Spruce, Pine, European Oak, Scotch Larch, Siberian Larch, Western Red Cedar and Birch Plywood.

Application

The application rate is 3.7m² per litre and is usually achieved in approximately 3 coats depending on moisture content of the substrate and atmospheric conditions. Coats should be applied at intervals of a minimum of 1 hour giving a total coverage of 270ml m² (minimum). Do not mix with other solutions, stir well. Use brush, roller, spray (use appropriate mask when spraying), dip or vacuum method. Minimum temperature for application 5ºC 

For further information on HR-Prof latest testing on various timber substrates please click here 


 

Compatible Stains 

Remmers Aidol HK Stain

This stain has been awarded the quality mark "RAL Wood
Preservative" after official evaluation of its effectiveness against wood pests and of its safeness for health and the environment when used properly.

Directions: Aidol HK Stain can be applied by brush, dipping and flow coating. Spraying is only permitted in closed facilities. The stain is ready to use after thorough stirring or shaking. Remove old coatings such as thick-layer stains and finishing paints as well as bark and bast. The wood must be clean and dry. Apply the stain with a soft brush in the direction of the grain. After drying (approx. 12 hours), apply a second coat. In the case of oak, a coat of clear stain is recommended as a primer. Check the colour on the respective wood surface with a trial coating.

Renovation coats: the substrate must be clean and dry and can be recoated without sanding or stripping. Close opened containers tightly after use; use the contents as soon as possible. Permissible wood moisture for soft wood is 25% (maximum) and for hardwood 20% (maximum).

Coverage approximately 50m2 per 5 Litre

Note: HR-Prof Flame Retardant should be applied before the Aidol HK Stain.

Aidol HK Stain - Please click here to purchase Aidol HK Stain and view the colour chart 





 

 

Brand:
HR-Prof
weight:
2100
Product Condition:
New
Product Added to your Cart
x

-------- OR --------