AW400 Glass Protection Film is a self adhesive polyethylene film with acrylic adhesive suitable for application to glass & other surfaces requiring temporary protection against damage during processing & storage.

Usage/purpose

AW400 Glass Protection Film is a selfadhesive film suitable for application to glass and other surfaces requiring temporary protection against damage during processing and storage or resulting from other trades activity once installed. The film can be applied to glass, rough painted metals and rough plastic surfaces. The film must be removed and potentially replaced at a maximum 6 months* following application due to potential UV degradation causing difficult removal and potential damage to the glazing.


Note: If the product has been applied during late spring and summer then it is advised that the film be replaced every 3 months, as exposure during this time could make subsequent removal difficult due to high UV conditions.

The above data and recommendations are given in good faith, on the basis of practical experience, but without warranty. The customer should carry out their own tests to confirm the suitability of the product for the application under consideration. Above technical data subject to tolerances up to 15%.

Safety data sheet must be read and understood before use.

• Protects glass from mortar, render or paint splatter
• Protects window and door profiles and fabricated components
• Translucent finish maximises light transmittance
• Easy application
• Easy removal
• 6 months UV resistance: If the product has been applied during late spring and summer then it is advised that the film be replaced every 3 months, as exposure during this time could make subsequent removal difficult due to high UV conditions.
  
  
  

Data Sheets

Technical Data Sheet
Safety Data Sheets





The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.