Use OT301 for creating airtight joints between illbruck vapour barrier and structural elements, airtightness membranes, wall lining membranes of all kinds and for bonding wind-tight joints between sub-roof and roof-lining membranes. A permanent bond is achieved on all illbruck membranes, PE, PA, PP and aluminium foil used to create an airtight seal.

OT301 is not suitable for external applications where it is likely to come into contact with liquid water. Sustained contact with water may result in re emulsification and loss of adhesion.

Safety data sheet must be read and understood before use. Flammable - keep away from open flames and other ignition sources.

• Very high, permanent adhesion
• Quick drying
• No pressure lath is required on loadbearing substrates
• Very elastic, permanently flexible
• Can be applied in low temperatures and suitable for permanent use in a very wide temperature range
• Can be stored in very low temperatures
  
  

Data Sheets

Safety Data Sheets
Test / Certification Document





The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.