FirePro CB Coating is a water-based fire-resistant ablative coating. It is designed to reseal the surface of FirePro CB50 where damage to the ablative coating may have occurred during installation.

FirePro CB50 have been tested as penetration seals and been classified for fire resistance periods of up to 120 minutes in accordance with BS EN 1366-3: 2021+A1: 2024, subject to the application. FirePro CB Coating has replaced FirePro Ablative Liquid as the new EN-tested solution.

Features and benefits:

Suitable for spray or brush application.
Dries to give a hard wearing white surface finish.
Provides a stable surface for adhesive and fixing sealants.

Application

For use with FirePro CB50/60.

Product Data Sheet

Technical datasheet

Material Safety Data Sheet GB
Material Safety Data Sheet NI
Installation Guidelines

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.