CT456 is a spray-applied, modified chloroprene rubber contact adhesive that is ideal for laminating, postforming and similar applications.

Usage/purpose

T456 has a variety of industrial applications, but is particularly suited to the postforming of plastic laminates. The adhesive has good temperature resistance, instant grab and high ultimate bond strength, so is suitable for even tight radii postforming. It is also used for bonding a wide range of materials, such as metals, expanded foams, plywood, OSB, particleboard, hardboard and plasterboard.

Bonding to painted surfaces is not recommended. Not suitable for bonding expanded polystyrene. Do not use for bonding highly plasticised PVC’s.

Safety data sheet must be read and understood before use. Highly flammable - keep away from open flames and other ignition sources.

Product Benefits

• Very high initial grab and ultimate bond strength contact adhesive
• Ideal for laminate postforming, even in tight radii operations
• Improved atomisation allows immediate lay up, eliminates blooming and reduces odour
• Sprayable formulation allows high coverage rates and rapid application times to be achieved
  
  

Data Sheets

Technical Data Sheet
Safety Data Sheets




The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.