FA810 is a gun grade, silicone sealant. FA810 is a clean room silicone sealant and has high resistance to microbial growth, helps prevent a build-up of bacteria and fungi microbes. Sealant for the air and water tight sealing of joints and assemblies in cleanroom, laboratories, hospitals, cooling and storage areas and other such applications where hygienic conditions prevail.

Usage/purpose

FA810 is a multi-purpose, neutral curing silicone seal that forms a permanently flexile weather-tight seal. It is suitable for a range of sealing applications including internal and external weather sealing, general construction applications.

Apply FA810 evenly and without air bubbles into the joint using a manual or electric sealant gun. Smooth the surface with an illbruck smoothing agent AA300 or AA301 within the film formation time. Use smoothing agent sparingly to avoid contamination, remove immediately with water should contamination occur. For a neat finish, use masking tape for the joint edges and remove immediately after smoothing.


Safety data sheet must be read and understood.

Made to Order

310 ml Cartridge (12 per carton)
400 ml Sausage (12 per carton)
600 ml Sausage (12 per carton)

Product and safety data sheets must be carefully read and understood before the product is used.

• Meets requirements of EN ISO 846(Method A & C) and VDI 6022 (Ventilation & Air Conditioning)
• Tested according to FDA CFR21§177.2600by IANESCO (France)
• High resistance to microbial growth, helps prevent a build-up of bacteria and fungi microbes
• Odourless after curing
• Free of MEKO, isocyanates, flame retardants, BPAs, PAHs, phthalates, fluorine, bromine and ozone-depleting compounds
  
  

Data Sheets

Technical Data Sheet
Safety Data Sheets





The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.