AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLE
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XCG
XOF
XPF
YER
ZAR
ZMW
ZWG
ZWL
Carboline Carboguard 690 RAL 7035
Carboline Carboguard 690 RAL 7035
High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects; and is ideal for coatings under insulation up to 300°F (149°C).
Product Features
• High solids, low VOC
• High build (16 mils)
• Low temperature cure (20°F)
• Excellent moisture tolerance during application
• Continues to cure underwater
• Fast cure response
• Suitable for use in USDA inspected facilities
| Color | Standard colors include: S800 (White) and C705 (Light Grey) Other colors may be available on request. Contact your Carboline Representative for availability. |
| Finish | Semi-Gloss |
| Primer | Self-Priming, Zinc-rich, or epoxies |
| Dry Film Thickness | 5 - 8 mils (127 - 203 microns) per coat |
| Solids Content | By Volume 80% +/- 2% |
| Theoretical Coverage Rate | 1283 ft²/gal at 1.0 mils (31.5 m²/l at 25 microns) 257 ft²/gal at 5.0 mils (6.3 m²/l at 125 microns) 160 ft²/gal at 8.0 mils (3.9 m²/l at 200 microns) Allow for loss in mixing and application. |
| VOC Values | As Supplied : 1.42 lbs/gal (170 g/l) mixed Thinner 2 : 16 oz/gal 2.06 lbs/gal (248 g/l) These are nominal values and may vary with color. |
| Dry Temp. Resistance | Continuous: 300°F (149°C) Non-continuous: 350°F (176°C) Discoloration occurs above 200°F (93°C) but does not affect performance. |
| Limitations | • Epoxies may lose gloss, discolor and chalk when exposed to sunlight. • Discoloration is more pronounced with this product. • For immersion projects use only factory made material in special colors. • This product has the ability to be applied over damp or even wet substrates. Remove excess water by blowing down the surface and apply in multiple coats to achieve desired film thickness. • Brush or roller, and multiple coats are preferred over wet substrates. |
| Temperature Resistance (Immersion) | Immersion temperature resistance depends upon exposure (120°F maximum). Consult Carboline Technical Service for specific information. Linings exposed to cargos warmer than the outside steel temperature are subject to a "cold-wall' effect. The smaller the temperature differential, the less negative influence on performance. |
| Topcoats | May be coated with Acrylics, Epoxies, Alkyds, or Polyurethanes depending on exposure and need. |
Data Sheets
Carboguard 690 PDS
Carboguard 690 SDS Part A
Carboguard 690 SDS Part B
Carboguard 690 Product Flyer
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
