AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLE
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XCG
XOF
XPF
YER
ZAR
ZMW
ZWG
ZWL
Carboline Phenoline 187 VOC 10L Kit
Carboline Phenoline 187 VOC 10L Kit
Phenoline 187 VOC High solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C) food and beverage industries, and water and wastewater exposures. Is excellent as a protective coating under insulation, operating at (400°F/204°C). Outstanding resistance to wet/dry cycling conditions at these elevated temperatures.
Product Features
- High solids; Low VOC formula
- VOC compliant to current AIM regulations
- Excellent overall chemical resistance
- Excellent for crude-oil storage
- Excellent resistance up to 400°F(204°C)
- Excellent abrasion & thermal shock resistance
- Meets the FDA requirements for 21CFR 175.300 for direct food contact
- Passes EI 1541 jet fuel gum test
- Complies with MIL-PRF-4556F testing
| Color | Red (0500),Gray (0700); White (0800) |
| Finish | Semi-Gloss |
| Primer | Self-priming |
| Dry Film Thickness | 4 - 6 mils (102 - 152 microns) per coat Two coats are needed for optimum performance. A third coat may be applied for additional thickness and/or service life. |
| Solids Content | By Volume 84% +/- 2% |
| Theoretical Coverage Rate |
1347 ft²/gal at 1.0 mils (33.1 m²/l at 25 microns) 337 ft²/gal at 4.0 mils (8.3 m²/l at 100 microns) 225 ft²/gal at 6.0 mils (5.5 m²/l at 150 microns) Allow for loss in mixing and application. |
| VOC Value(s) | As Supplied : 1.00 lbs/gal (119 g/l) Thinner 2 : 20% by volume 2.00 lbs./gal (240 g/l) These are nominal values and may vary slightly with color. |
| Under Insulation Resistance |
Continuous: 400°F (204°C) Non-Continuous: 450°F (232°C) |
| Temperature Resistance (Immersion) |
Immersion temperature resistance depends upon exposure. Consult Carboline Technical Service for specific information. |
Data Sheets
Phenoline 187 VOC PDS
Phenoline 187 VOC (Hi Performance Catalyst) SDS Part B
Phenoline 187 VOC SDS Part A
Phenoline 187 VOC Product Flyer
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
