Firefly Staples 8mm-12mm
Firefly SS Staples
8mm-12mm Stainless Steel Staples - 5000 per box
FIREFLY materials are recommended to be joined by means of stapling the seams, using either 8mm or 12mm stainless steel staples fired from a lightweight R31 Staple Gun.
Firefly 8mm stainless steel staples suitable for use with firefly curtain including Phoenix, Vulcan, Plus 30, Plus 60. If using Firefly Titan then 12mm staples used.
Please note if using the Firefly Phoenix system it does not provide any insulation just integrity (fire and smoke). By insulation we mean heat insulation, so that in the event of a fire Phoenix will stop the flame and smoke from penetrating the barrier, but will not stop the heat from the fire from passing through. If insulation is a requirement, you will need to consider one of the following products, VULCAN, PLUS30 or PLUS60. These products all offer integrity and insulation at various levels. Please contact us with details of your project so we can provide you with further information on these products.
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.