Fischer FFB-ES ElastoSeal is a one part water based acrylic coating which has been designed to provide smoke and fire protection on construction joints in both vertical and horizontal appliations. Tested to BS EN1366-4 and BS476-20 the FFB-ES is also ETA approved and CE marked. Developed for use on 80kg/m³ stone wool base the FFB-ES is also halogen and solvent free and exhibits excellent slump and movement characterestics.

Advantages

• Openings up to 20“ (500 mm) wide
• Movement capability of 25 %
• Working temperature between -10 °C and 95 °C
• Can be spray or brush applied
• Air permability
• Acoustic performance
• 80 kg/m³ stone wool base
• 2.5 mm WFT required
  
  

Datasheets

Safety data sheet
Sales materials
Declaration of Performance
UL-Certificate





The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.