Hoppe ARRONE AR911-S-80-SSS Mortice Latch Square Forend (80mm Backset)
Hoppe ARRONE AR911-S-80-SSS Mortice Latch Square Forend (80mm Backset)
ARRONE mortice latch case:
- Function : Latchbolt Operation
- Forend/Strike Material : Stainless Steel
- Forend Type : Single
- CE Marked : AG0067, UKCA Marked : AG7668
- BS EN 12209: 3 | X | 8 | 1* | 0 | G | - | B | 0 | 3 | 0 - Certifire Approved : CF530, CE DOP: HUK0009, UKCA DOP : HUK0009-UK
- Testing : BS EN 1634-1. Assessed For Use On 30, 60, 90 And 120 Minute Timber Fire Doors And 240 Minute Steel Fire Doors.
- Meets dimensional recommendations of BS 8300 and ADM for locks
- The AR911 series lock case has been successfully fire tested with the use of an intumescent kit. The supply and fitting of this intumescent kit is essential to the products compliance with the fire test and CE marking evidence it has gained. HOPPE takes no responsibility for any locks purchased and fitted without sufficient intumescent protection.
Specifications :
Corner : Square Corner
Door Thickness : 44 mm
Fixings : Timber Door
Backset : 80 mm, Pierced For Furniture At 38 mm Centres
Finish : Satin Stainless Steel
Face Plate Finish : F69 Satin Stainless Steel
Case Dimensions : Depth: 108 mm Length: 165 mm Width: 16 mm, Modular
Commodity Class : Components
Shape : Square
Door Type : Wooden Door
Door Thickness : 44 mm
Data Sheets
Product Data Sheets
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
