WD120 is a premium PVA adhesive typically used as in furniture manufacture. Suitable for internal & external applications where resistance to water is required. It is ideal for bonding wood, decorative laminates, chipboard, blockboard, veneers and similar substrates.

Usage/purpose

For Interior and Exterior Use. WD120 is a PVA wood adhesive ideal for bonding wood, decorative laminates, chipboard, blockboard, veneers and similar substrates. illbruck WD120 is suitable for use in high humidity indoor environments and indoor or outdoor applications where intermittent contact with cold or hot water may occur. Typically used in the manufacture of furniture and the installation of staircases.

Product Benefits

• Weatherproof PVA adhesive suitable for external use - meets the requirements of EN 204 (D3)
• Can be used in load bearing applications - tested to BS 4071 for creep resistance
• Suitable for RF curing systems, hot and cold pressing and for brush, roller or spray application
• Rapid development of bond with a high final bond strength
  
  

Data Sheets

Technical Data Sheet
Safety Data Sheets



The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.