MACROPOXY M111 EPOXY WET BLAST PRIMER

For application to surfaces which have been prepared by wet abrasive blasting. May also be applied to grit blasted surfaces prepared by UHP water blasting where existing blast profile is exposed.

Material Type: A 2-pack epoxy zinc phosphate primer

Typical thickness:                50 microns dry, 93 microns wet
Volume Solids                        54%
Packaging:                              5 and 20 Litre containers.
Colours Available:                Red Oxide 
Gloss Level                             Matt
Method of Application          Airless Spray, Air Spray, Brush, Roller

Recommended Thinner: No 5
                                                          

Product Data Sheet
Safety Data Sheet

Carriage for this product is calculated by weight and is shown in the checkout area.