Macropoxy L574 TwoPack Epoxy Zinc Phosphate Temporary Protective Primer
Temporary protective primer for steel surfaces prepared by abrasive blast cleaning. Suitable for use in conjunction with cathodically protected steel. Suitable for welding and fabrication and for overcoating with most paints in common use except high content metallic zinc products (see note on fabrication overleaf). As a sealer for aluminium and zinc metal spray. As a primer for use over stainless steel and non-ferrous metallic substrates.
Material Type: 2-pack epoxy temporary protective primer
Typical thickness: 25 microns dry, 86 microns wet
Volume Solids 29%
Packaging: 5 and 20 Litre containers.
Colours Available: Grey and Red Oxide
Gloss Level Matt
Method of Application Airless Spray, Air Spray, Brush, Roller
Recommended Thinner: Leigh's Thinner/Cleanser NO5 - 5L
Recommended Cleanser: Leigh's Thinner/Cleanser NO5 - 5L
Product Data Sheet
Carriage for this product is calculated by weight and is shown in the checkout area.