OBEX CORTEX 0.75mm EPDM Membrane Inc 0761 Gasket - Class E
OBEX CORTEX 0.75mm EPDM Membrane Inc 0761 Gasket - Class E
OBEX CORTEX EPDM Membrane With Gasket is a fully flexible membrane used to create weather and airtight seals around openings such as windows, doors and curtain walling on non-relevant buildings.
This membrane is manufactured with a gasket on one edge which enables the membrane to be securely attached directly into the channel of the window frame, or into the OBEX CORTEX Gasket Carrier.
Our range of gaskets are suitable for most widely used window systems such as Schuco, Reynaers, Aluprof, Senior, and many others.
Typical Uses
- Creating a weather and airtight seal around openings on non-relevant buildings
Product Specifications:-
Widths
50mm - 1000mm
Length
20m
Thicknesses
0.6mm, 0.75mm, 1.0mm, 1.2mm, 1.5mm
Technical Specifications:-
Fire Classification | EN 13501-1
E
Watertightness | EN 1928
Pass – 2 kPa for 24 hours
Water Vapour Permeability | EN 1931
50,000µ
Tensile Strength | EN 12311-2
≥7MPa
Air Tightness | EN 12114
<0.1m³
3rd Party Approved
BBA Approval – No. 17/5396
Product Data Sheet
Technical Data Sheet
Certificate
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
