Teroson FO 50 Foil-Tack Duo Self-Adhesive Sealing Membrane

ter-fo-5o-foil-tack-duo
£534.96 inc. tax

£445.80 ex. tax
? Tax based on United Kingdom.
Dimension*
Teroson FO 50 Foil-Tack Duo Self-Adhesive Sealing Membrane Summary

Teroson FO 50 Foil-Tack Duo Self-Adhesive Sealing Membrane

TEROSON® FO 50 FOIL-TACK DUO - with double-sided full-surface self-adhesive PSA hotmelt adhesive. Ideally suited for installation on window frames as well as direct bonding without primer on smooth mineral and metal substrates. All year round, no need for full-surface application of an adhesive paste. Reliable results and time savings.

Features and benefits

Double-sided self-adhesive, vapor-retarding and plasterable sealing strip for air- and wind-tight sealing of connections – indoor use (warm side of the building)

Properties

  • Vapor-retarding (sd value ≥ 50 m)
  • Suitable for new construction projects
  • Flexible and robust
  • Can be applied down to -5 °C
  • Asymmetrically divided release film with finger lift

How to use

SUBSTRATE PREPARATION

Clean the substrate before fixing the sealing strip. The areas to be sealed must be load-bearing, sound and free from dust, release agents, oil, grease, sintered layers and other substances that may impair adhesion.All metal substrates, e.g. element surfaces of aluminum or zinc, must be free of oxide layers and release agents.



APPLICATION: Use of primers

On mineral, weakly bound but load-bearing substrates it is recommended to apply a TEROSON primer. In adverse weather conditions, the use of adhesion promoters is required on mineral substrates. Particularly suitable is TEROSON PR Primer M+S. 



CONNECTION SEALS ON WINDOWS / FACADES

The foil is equipped with a release film on both sides. After peeling off the 20 mm wide film on the front side, this part of the sealing strip can be fixed cleanly and efficiently to the profile/frame. In the 2nd step, evenly pull the release film off the self-adhesive hotmelt coating. Press the strip firmly down to the substrate using the TEROSON hard rubber roller. 

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights. 

 

 

Brand:
Teroson
weight:
5001.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------