WRX Trade Multi-Grip All-Surface Paint is a high-quality, water-based pure acrylic top coat with a semi-matt finish. Designed for interior and exterior use on wood, metal, plaster, brick, tile and more, it delivers excellent adhesion—often without a primer/undercoat—together with outstanding coverage and durable, washable protection.

Preparation:

Ensure all surfaces are sound, clean, suitably dry and free from contaminants that may impair adhesion.

Remove all loose or flaking material and repair defects.

Algae, mould or fungal growth: remove thoroughly and treat with a suitable fungicidal wash.

Chalky, weathered or highly porous surfaces: stabilise with a clear surface stabiliser.

Bare metal: degrease; prime rust-prone areas with an anti-rust primer.

Wood: sand with the grain; remove dust and resin; treat bare wood with a wood preservative.

Plastic/low-adhesion surfaces: carry out an adhesion test on a small inconspicuous area first.

Smooth, glossy surfaces: lightly abrade to promote adhesion.

For full instructions and technical guidance, consult the Technical Data Sheet at wrxtrade.co.uk before use.

Application:

Do not apply in damp or humid conditions, or when the temperature is below +8 °C. For exterior use, avoid application when rain is imminent.

Stir thoroughly before use. The product is ready for use; if required, thin with up to 10% clean water.

Apply with a high-quality synthetic brush, short-pile microfibre roller or spray.

Load the brush generously and apply evenly—avoid over-spreading.

Two coats are recommended for full coverage; additional coats may be required when covering darker colours.

Coverage:

Up to 16 m² per litre per coat, depending on surface texture and absorbency.

Drying Time:

Touch dry: approximately 30 minutes under normal conditions

Recoat: 2–4 hours (longer in high humidity)

Full cure: 28 days

After Painting:

Remove excess paint from tools before washing with warm or soapy water.

Do not pour leftover paint into drains or watercourses. Consult your local authority for disposal guidance.

Reseal the lid tightly after use.

Storage:

Store and transport upright in a dry place. Protect from frost, direct sunlight and extreme temperatures.

Health & Safety Information:

Keep out of reach of children. Avoid contact with eyes, skin and clothing. Do not eat, drink or smoke when using this product.
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do; continue rinsing.
Dispose of contents/container via licensed waste contractors.
Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (CAS 55965-84-9) and 1,2-benzisothiazol-3(2H)-one (CAS 2634-33-5). May produce an allergic reaction.
Warning: Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

VOC:

EU limit value for this product (Cat. A/i): 140 g/L (2010). This product contains max. 35 g/L VOC.
VOCs (Volatile Organic Compounds) contribute to atmospheric pollution.

Min Order Qty : 12

Product Data Sheet 

Technical Data Sheet

Safety Data Sheet