FR Adhesive contains a water-based inorganic polymer and filler and is designed to withstand temperatures greater than 1200 °C. It is supplied as a ready-to-use thixotropic paste which exhibits excellent early grab and rapid bond strength.

The product forms a cement after curing with a permanent bond which gives excellent adhesion in service.

It can be used as an adhesive and as a filler with multiple usages where bonding or sealing very hot surfaces is required, sustaining a seal or a bond in a fire situation without detachment.

 Benefits

• Ready to use and easy to apply
• 12 months storage time (under correct conditions)
• 30 years working life (under correct conditions)

• Ideal for bonding mineral fibre boards to steel, timber and concrete, adding an extra layer of protection against heat transfer

• Ideal for sealing joints on stoves, flues, grates and central heating boilers

• Ideal for sealing annular gaps on high surface temperature pipes
• Ideal for sealing and repairing small cracks and holes in car exhausts systems - stops noise and gas emission leaks

• Suitable for most surfaces, including stone, brick, concrete, cement, plaster, timber, metals, stone wool, glass, paper, vitreous and ceramic surfaces and all inorganic materials (on plastics and painted surfaces, adhesion should be tested)

• Instant grab with no need for additional support (under correct applications)

• High bond strength when cured
• Designed to withstand temperatures above 1,200 °C
• Seals and repairs systems in situ

• Prevents escape of dangerous exhaust fumes from joints and repairs
• Ready to use and easy to apply
• Fast setting - air cures to a hard finish especially when heated, tack free in approx. 1 hour, good bond in 4 hours and full cure in 48 hours
• Slump resistant

• Shock and vibration resistant during service
• No priming necessary for application to most materials
• The fire performance specification of a bond has been derived when the adhesive has been let to cure for only 24 hours
• Product is practically odourless and VOC free
• Alkaline - does not attack acid sensitive substrates
• 12 months storage time (under correct conditions)
• 30 years working life (under correct conditions)

Limitations

• Not intended for application on substrates that can exude certain oils and plasticizers or solvents
• Not suitable for food contact or medical applications
• Cannot be subject to sub-zero temperatures before setting (48 hours)
• Cannot be subjected directly to water or moisture
• Interior Use - Only

Product Data Sheets
Data Sheet
Safety Data Sheet

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.