Protecta FR BOARD 1200x600x50mm
The Protecta FR Board consists of a high-density rock wool board which is coated with fire retardant paint on one or two sides, depending on where the fire sealing is to be carried out.
The rock wool is to keep the temperature increase down, whereas the fire retardant paint is designed to prevent fire and hot gases from leaking through the mineral wool board. Currently, this is the most common fire sealing method as it is a quick way of sealing big and/or complicated fire seals when the fitter has some experience with the system. Measurements have shown that you often only spend half the time compared to the traditional mortar system and that it may even be used in wet areas as well as outdoors.
The fire board has been tested on all types of through-penetrations in all types of constructions and may also be combined with Protecta Cable Transit, Collar and Pipe Wrap. It is also ideal for closing over all types of ceilings against concrete floors and has been approved for upgrading of all types of floors.
Product Data Sheets:
- Classified for all types of constructions with or without building service penetrations
- Simple and very quick to install
- Easy to retrofit additional building services after installation
- Permanently flexible - will accommodate movements during fire and smaller movements in the construction it has been fitted within
- Suitable for most surfaces, including concrete, bricks, masonry, steel, wood, gypsum, glass, plastic and most non-porous surfaces
- May be used in unlimited lengths in walls with heights up to 1200mm and in floors with widths up to 120mm.
- May be installed in gypsum walls without framing around the opening
- Halogen free with added fungicides
- Once fully cured, the coated board resists water and frost
- Protecta FR Board can be supplied with a smooth surface
- The fire performance specification of the board has been derived when the seal has been let to cure for a month
- Precautions are required to be taken to prevent a person stepping onto a blank horizontal penetration seal
FR Board Technical Data Sheet
FR Board Installation InstructionsFR Board Safety Data Sheet
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.