Firechief SPC1 Contractors Standpipe c/w Double Check Valve. Our contractor's standpipe is a tap which can be connected to a hydrant to dispense water to areas that do not have a running water supply.

Firechief HKB2 Steel Hydrant Key and Bar. This Hydrant key and bar is used for turning the water supply on and off via the hydrant. Internal dimension of key - 35mm square

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 560mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

This standpipe has two inlets to allow more than one hose to be connected at a time. It is used to dispense water to areas that do not have a running water supply. It also has a check valve which prevents...

A single standpipe is used to dispense water to areas that do not have a running water supply (such as caravan sites etc). It is a freestanding pipe made of aluminium alloy with 2 1/2" female BSRT (British...

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 350mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

Firechief 19mm fire hose is approved to EN694. This hose is an ideal purchase for replacing damaged hose on a reel without having the cost of replacing the full reel. Also, if the hose is not to be used...

Firechief 25mm fire hose is approved to EN694. This hose is an ideal purchase for replacing damaged hose on a reel without having the cost of replacing the full reel. Also, if the hose is not to be used...

The purpose of the beaded hose guide is to bring the hose off the reel straight to avoid the hose falling out the side and becoming tangled. They are fixed nearby the reel and the hose fed through. Typically...

A jet spray nozzle for hose reels gives the user a controllable jet of water when extinguishing a fire. The nozzle simply pushes into the hose and is ready to use.

Firechief SBP1 Aluminium Alloy 2 " Blank Plug. Blank plugs are used to seal off water supplies from dirt and contamination. This aluminium blank plug is pressure resistant.

Manufactured in light alloy, the lever operated nozzle has lever to operate the on and off positions to prevent/release the water supply. It is for use with 65mm layflat hosing.

Our 65mm layflat fire hose is constructed from close woven twill polyester filament yarns with synthetic rubber lining. It comes as a 23 meter length and complete with wired on alloy couplings.

Introducing the Firechief CSN1 2 " Alloy Nozzle your go-to solution for effective fire safety! This robust 2 " Cooper spray aluminium nozzle features an off position and a versatile 5/8 jet and spray option,...

This plastic blank plug is used to seal off water supplies from dirt and contamination. It is not pressure resistant so can only be used as a dust cover.

A jet spray nozzle for hose reels gives the user a controllable jet of water when extinguishing a fire. The nozzle simply pushes into the hose and is ready to use.

Firechief FWC25-B 25mm Flexible Water Inlet Pipe-Red. The 25mm flexible water inlet pipe is suitable for use with swinging hose reels only (RMSA25-B, RMSA19-B, RMSM25-B, RMSM19-B).

Firechief 19mm x 30m Fire Hose Approved to EN694 Can be used within -20 C to 60 C temperature range Ideal for applications where long intervals can occur between use Designed for emergency use

Introducing the Firechief NJS19/B 19mm Jet Spray Nozzle, featuring a robust Brass Mechanism designed for durability and efficiency. This nozzle is perfect for a variety of applications, ensuring a powerful...

This Firechief 19mm hose reel is a fixed reel meaning that the reel is fixed flat against the wall and can't change position. It is a manually operated hose real so the water requires activating by a gate...

This Firechief 25mm hose reel is a fixed reel meaning that the reel is designed to be wall mounted. It is a manually operated hose real so the water requires activating by a gate valve. All Firechief hose...