AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLE
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XCG
XOF
XPF
YER
ZAR
ZMW
ZWG
ZWL
Carboline Carboguard 890 GF
Carboline Carboguard 890 GF
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.
Product Features
• Excellent chemical resistance
• Surface tolerant characteristics for less severe applications
• Low-temperature version: 890 LT GF
• Self-priming and primer/finish capabilities
• Excellent abrasion resistance & hardness
• VOC compliant to current AIM regulations
• Non-skid service with optional fillers
| Color | C900 (Black), S800 (White), C703 (Grey), C705 (Light Grey), 0500 (Tile Red), 5555 (Safety Red), 0200 (Tan), 6666 (Safety Yellow), 1675 (Ignition Yellow) Other colors may be available on request. Contact your Carboline Representative for availability. |
| Finish | Flat |
| Primer | Normally self-priming. May be applied over epoxy primers. |
| Dry Film Thickness | 8 - 20 mils (203 - 508 microns) per coat |
| Solids Content | By Volume 77% +/- 2% |
| Theoretical Coverage Rate | 1235 ft²/gal at 1.0 mils (30.3 m²/l at 25 microns) 154 ft²/gal at 8.0 mils (3.8 m²/l at 200 microns) 62 ft²/gal at 20.0 mils (1.5 m²/l at 500 microns) Allow for loss in mixing and application. |
| VOC Values | As Supplied : 1.6 lbs/gal (192 g/l) Thinner 2 : 13 oz/gal: 2.1 lbs./gal (230 g/l) Thinner 213 : 13 oz/gal: 2.1 lbs/gal (251 g/l) Thinner 33 : 16 oz/gal: 2.2 lbs/gal (248 g/l) Use Thinner 76 up to 16 oz per gallon where on-photochemically reactive solvents are required. |
| Dry Temp. Resistance | Continuous: 400°F (204°C) Non-Continuous: 400°F (204°C) Discoloration and loss of gloss occurs above 200°F (93°C) but does not affect performance. |
| Under Insulation Resistance | Continuous: 300°F (149°C) Discoloration and loss of gloss occurs above 200°F (93°C) but does not affect performance. |
| Limitations | Epoxies may lose gloss, discolor and chalk when exposed to sunlight. Do not apply over acrylic or alkyd coatings. If discoloration is objectionable it may be top coated. Use only factory-made colors for splash zone or immersion service. |
| Topcoats | May be coated with acrylics, epoxies or polyrethanes depending upon exposure and need. |
Data Sheets
Carboguard 890 GF PDS
Carboguard 890 GF (Carboguard 890) SDS Part A
Carboguard 890 GF (Carboguard 890) SDS Part B
Glass Flake Additive SDS
Carboguard 890 GF Series Product Flyer
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
