Firebreak Batts 1200x600x50mm

FBswf50
£27.54 inc. tax

£22.95 ex. tax
? Tax based on United Kingdom.
Firebreak Batts 1200x600x50mm Summary

Firebreak Batts 1200x600x50mm

1200x600x50mm - Firebreak Batts are stone mineral wool boards coated on both faces with a flexible fire resistant ablative coating. They are used to form fire and smoke stop seals able to reinstate the fire resistance of separating walls and floors when penetrated by a wide range of building services.

Key Features & Benefits

  • Independently tested to EN 1366-3: 2009 providing up to 2 hours fire resistance
  • Tested in conjunction with a wide range of service penetrations including bunched cables, large power cables, steel and copper pipes and fire dampers
  • Can be used in conjunction with 100mm thick lightweight (plasterboard) partitions
  • Seal designs available for large openings in both walls (1200mm wide x 1800mm high) and floors (1400mm x 500mm)
  • Tested with various installation options including pattress fixings
  • Safe: free of breathable fibres and halogens
  • Easy to use: can be easily cut using simple hand tools
  • Supplied in a standard 1200mm x 600mm x 50mm board size
  • Quick to install using Firebreak 22 sealant
  • Seals are easily modified and reinstated to allow for later installation of additional services
  • Non-combustible core
  • Good acoustic performance
  • Tested for air permeability
  • Long service life and maintenance free once installed correctly
  • Quality assured including ISO 9001, CE Marking and independent third party product certification

Typical applications

  • Both large and small multiple service penetration seals in concrete floors
  • Fire seals around cables and pipes passing through fire resistant flexible partitions or concrete/masonry walls
  • Closing openings above fire doors behind suspended ceilings
  • Closing irregular gaps in fire resistant construction

Testing and certification

  • Extensive testing to EN 1366-3: 2009 providing up to 2 hours fire resistance to service penetrations
  • Classification to EN 13501 and CE Mark (ETA 21/0214)
  • Mechanical and durability testing to EAD 350454-00- 1104
  • Third party product certification with UL International (Certificate# UL-EU-01075-CPR)

Product Data Sheet Links
Firebreak Batts Product Data Sheet
Firebreak Batts Safety Data Sheet

Technical Drawing
Batts Technical Drawing - Cables in Double Seal Batt Box 
Batts Technical Drawing - Metal Pipes in Single and Double Seals 
BF-CP-0063 - Double batt floor seal with cable penetrations
BF-PP-0062 - Double batt floor seal with metal pipe penetrations
BW-CP-0061 - Double batt wall seal with cable penetrations
BW-CP-0061- Double batt wall seal with cable penetration installation stages 
BW-CP-0064 - Batt wall seals with cable penetrations
BW-DP-0066 - Patress batt wall seal around steel duct + damper 
BW-DP-0068 - Double batt wall seal around fire resistant duct
BW-PP-0060 - Batt Wall seals with metal pipe penetrations


The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.  

Brand:
Firebreak
weight:
8000.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------