A fast drying cement-based, pump applied floor topping for fast track renovation of concrete floors.

Flowscreed Industrial Top can be used as a wearing screed or as a substrate for Flowcrete resin toppings to where better aesthetics and improved wear and chemical resistance is required. An 8 mm average thickness is a typical expectation on a reasonably level base.

This system is suitable for warehouses, production zones, aircraft hangers, automotive and other areas where a hardwearing level floor is needed.

Product Benefits

• Rapid Installation: Up to 2000m2 per day under suitable conditions.
• Resistance: Good resistance to impact, point loading and abrasion.
• Protein Free: Will not harbour bacteria, yeast or mould.
• Fast Drying & Setting: Walk on after 2–4 hrs, cover after 24 hrs dependent on conditions.
  
  

Data Sheets

Technical Data Sheet
System Data Sheet
Safety Data Sheets
Declaration of Performance


The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.