FSI PS Coating White 5kg Pail
FSI PS Coating White 5kg Pail
PS Coating is an ablative coating applied to mineral wool board used to reinstate the fire resistance performance of wall construction where they have been provided with apertures for the penetration of single or multiple services.
Uses
The intended use of PS Coating is to reinstate the fire resistance performance of rigid and flexible wall constructions where they are penetrated by various cables and metallic pipes or blank seals.
- Fire Resistant testing to EN 1366-3 EI 60.
- Fire Resistant testing to EN 1366-3 EI 120 Blank Seal.
- Fire Classification to EN 13501-2.
- IET (IEE) 17th Edition Fire Stop Compliant to Regulation 527.1-3 – Electrical Installations.
- BS 7671-2008 Chapter 42 & 52 – Electrical Installations Fire Resistance.
- Fire resistance tested in flexible & rigid walls, Composite Panel and CLT.
- Air Permeability testing to EN 1026 to 600Pa.
- Acoustic Isolation testing to EN 10140 to 51dB.
Benefits
- Can be spray, brush or trowel applied.
- Suitable for indoor use without additional environmental protection.
- Remains flexible between -5°c to +70°c.
- Easy to use fibre free coating.
- Life expectancy of over 25 years.
- Suitable for large openings in walls with additional supports.
- Internal use – ETAG 026-3 (used as European Assessment Document EAD) Type Z1.
Data Sheets
Technical Data sheet
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
