Manor Hi Build Vinyl

A rapid drying high performance 'one coat', anti-corrosive, self priming low sheen topcoat, giving a 
tough flexible film with remarkable adhesion to many difficult substrates.

VOC Classification 2004/42 Cat A(i) = 500g/L.
Apply by brush, do not add thinners.

Typical uses are:
- Cladding Paint; dries at low temperatures down to 5 C for use throughout the year. SEE 
SUPPLEMENTARY DATA SHEET FOR USE AS A CLADDING PAINT.
- Metal Railings and Fencing; adheres directly to galvanised metal or steel with no need for 
mordant solutions or etch primers.
- Galvanised or steel structures subject to high humidity; such as steel roof trusses in swimming 
pools

Not suitable for use in areas subject to chemical / solvent attack
ARTICLES - that are not part of a building structure (and are therefore outside the scope 
of the building products VOC Product Directive)
Typical uses are: machinery, process steelwork, fixed plant, exteriors of piplelines and tanks; for 
areas exposed to high humidity and certain chemicals (seek advice from Manor Coating Systems 
Technical Department)

Not suitable for use in areas subject to chemical / solvent attack

Metal Finishing

A rapid dry 'one coat' anti corrosive self priming low sheen topcoat, giving a tough flexible film with 
remarkable adhesion to many difficult substrates with excellent re-coat characteristics.

Typical uses are:
- General Metal Fabrication; used to overcome problems associated with conventional alkyd paints 
subject to severe exposure conditions often associated with poor adhesion
- Wrought iron gates and railings, applied direct with no need for a mordant or etch primers
- Metalwork subject to low temperatures, Hi Build Vinyl X Semi-Matt remains flexible
- Metalwork subject to high humidity

Product Infomation
Composition Based on a modified vinyl resin pigmented with suitably selected pigments and modified zinc phosphate anticorrosive pigment.

Volume Solids: 43% Approx depending on colour

Weight Solids: 64% Approx depending on colour

VOC content: 500 Max. g/litre

Typical film thickness: Typically 150 microns wet and 65 microns dry Galavanised items; inc rails & fences to prevent zinc salts migrating a minimum dft of 75 microns is required If items are in coastal location a minimum 120 microns d.f.t. is required

Theoretical coverage: 6.7 sq metres/litre at 150 microns wet film thickness, 65 Dry film 
thickness

Dry heat resistance: 60 C
Flash Point Within the range: 21-31 C

Product Data Sheet

Product Safety Data Sheet

Manor Product Data Sheets - Thinners & Cleaners

*Please click on the colour chart below and select your chosen colour. The colour code should then be entered in the confirmation section at checkout area under additional instructions. 

 BS381C Colour Chart   BS4800 Colour Chart   RAL Colour Chart

  

Carriage for this product is calculated by weight and is shown in the checkout area.