Intubatt 3 -1200x600x100mm. Is supplied pre-configured, ablative coated on a single side and factory cured fire batt. Intubatt 3 is a strand and binder orientated rock fibre compressible slab, utilising a modified polymeric ablative coating to provide a fire and smoke seal. Intubatt 3 has a 7.5% overall movement capability used to provide a fire barrier in walls and floors up to 4 hours fire protection. Intubatt 3 can provide a fire seal for curtain wall, slab edge and vertical cladding applications. It can be installed using Z clips and intumastic.

Note: For vertical applications, only the Intubatt 3 coated both sides should be used.
 

All orders are usually despatched within 48 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.