Technical Specifications:-

3rd Party Approved

BBA Approval – No. 17/5396

Fire Classification | EN 13501-1

E

Watertightness | EN 1928

Pass – 2 kPa for 24 hours

Air Tightness | EN 12114

<0.1m³ net leakage

Tensile Strength (both directions) | EN 12311-2

≥7MPa

resistance to tearing (nail shank | EN 12310-2

≥ 10N

Water Vapour Permeability | EN 1931

50,000µ

Equivalent air layer thickness (Sd value) | EN 1931

37.5m

Vapour resistance | EN 1931

188 MNs/g

Elongation at break (both directions) | EN 12311-2

≥ 300%

Vapour resistivity | EN 1931

25,000 MNs/g

Durability against ageing | EN 1296/EN 1931

Pass

Service temperature (approx)

-45°C to 130°C

Adhesion

>19 N/cm

Product Data Sheet 

Technical Data Sheet
Typical Details Register

Certificate

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.