A high build 2-pack epoxy zinc phosphate primer/buildcoat.

Anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning.

Can be spray applied at thicknesses between 100 and 250 microns dry to provide both primer and buildcoat in a single coat. A top coat is only required for decorative purposes.

Without topcoat, the material will quickly discolour and patchiness may may be exaggerated due to film thickness variation, but will nonetheless provide excellent anti-corrosive protection as a single coat protective epoxy nor will intercoat adhesion be affected by any discolouration. See reverse side for further information on colour stability.

For use in internal/external exposed conditions including offshore, petrochemical and sub-sea environments.

Endorsements

• Network Rail – Item No 7.1.4
• Complies with BS5493:1977 - Table 4K Type KP1A.
• Approved for use by MoD(N) as a gel coat over FRP/GRP surfaces
• Complies with NORSOK M501 Rev. 5 System 1 and 7.

Recommended Thinner: 
Cleanser/Thinner No. 5 (for thinning) leanser/Thinner No. 5 (for thinning)
Cleanser/Thinner No. 9 or No. 13 (for cleaning) leanser/Thinner No. 9 or No. 13 (for cleaning)

Product Data Sheet Links

Data Sheet 

Safety Data Sheet - Base

Safety Data Sheet - Additive

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.