Sika Pyroplast Wood P White 5kg - For Internal timber and timber derivitives. Sika Pyroplast Wood P has a smooth white finish with no need for a topcoat except in the areas of high wear or moderate humidity. Pyroplast Wood P offer a EuroClass B-s2 do without a topcoat, if the Pyroplast Wood W Top Coat is applied the fire rating improves to a EuroClass B-s1 d0.

Usage

Reduction of ignitability of soft- and hardwood ≥ 10 mm thickness and other timber derivatives, i.e. plywood, chipboard, fibre insulation board, hardboard and also on veneering ≥ 13 mm thickness. Insulates against heat, checks fire, prevents propagation of fire and spread of flame and diminishes flue-gas temperatures. Sika Pyroplast Wood P should not be used in areas of high humidity, heat sources or on surfaces where significant physical impact is likely such as floors, stairs, etc. 

Coverage
14.3m² per 5kg (This allows for 2 coats)

Application Information 

Intumescent coating: Sika Pyroplast Wood P

Topcoat (optional): Sika Pyroplast Top W

Consumption 1 × 120 g/m2 Sika Pyroplast Wood P Primer (depending on wood sur[1]face)

1 × ≥ 350 g/m2 Sika® Pyroplast Wood P

1 x 120 g/m2 Sika Pyroplast Top W (optional)

Consumption rates are based on fire performance according EN 13501-1

B EN 13823 FIGRA ≤ 120 W/s und LFS < edge of specimen and

THR600s ≤ 7,5 MJ

and

EN ISO 11925-2 Exposure = 30 s Fs < 150 mm within 60 s

s1 SMOGRA ≤ 30 m2 / s2 and TSP600s ≤ 50 m2

d0 No flaming droplets/ particles in EN 13823 within 600 s

(As entire coating system. If no Topcoat is applied, classification Bs2d0 is

met!)

If consumption rates for alternative standards are requested, please consult the Technical Department.

Advantages

Ecological water based coating system

VOC Sika Pyroplast Wood P: < 1 g/l

VOC Sika Pyroplast Top W: < 48 g/l

Free of halogens and aromatic solvents

Low material consumption

Simple application

No additional statical load of coating

Individual coloration possible with topcoat Sika Pyroplast Top W

Smooth white finish

Approvals / Certificates

Independently fire tested and approved to European classification:

EN 13501-1 (ref: K-3067/776/14-2)

Colour

Sika Pyroplast Wood P Primer White

Sika Pyroplast Wood P           White

Sika Pyroplast Top W      Available in all RAL colours,

others available on request

Product Data Sheet Links

Data Sheet

Safety Data Sheet


For further information, please call us on 02476 422200.

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.