The surfaces to be bonded must be clean, dry and free of grease. In the production of metals, release agents are often used. These must be removed with TEROSON Adhesion-Promoting Cleaner (also part of the sealing system). The pre-treated surfaces, e.g., surfaces coated with textured paint, can afterwards be bonded with TEROSON AD 2100 MS adhesive.

Apply the adhesive in strands (recommended diameter 6-8 mm, distance between the strands approx. 10 cm) to the workpiece or substrate (depending on the expected load of the bond). When bonding on vapor-impermeable substrates like glass, metal or GRP, the strands must be interrupted by 10 cm every 50 cm to avoid trapping condensate. 

Immediately remove excess adhesive with a cloth. After curing, the adhesive can only be removed mechanically. 

Minimum Order Quantity : 12