FIREFLY Aluminium Foil Tape for use with Membrane WP & NB to ensure a fully tested and certified system. Roll size 75mm x 45m.

Use Areas
FIREFLY Aluminium Foil Tape is designed to seal laps and joints in conjunction with 
FIREFLY Membrane WP externally to create a weather resistant seal and FIREFLY
Membrane NB internally to create an air and vapour resistant seal. FIREFLY Aluminium 
Foil Tape can also be used as a repair tape for tears up to 25mm.

RELEASE LINER: White PE-Coated Silicone Release Paper
THICKNESS: 60µm Aluminium Foil 30µm
PEEL ADHESION: 180 °c 10 to 25N/25MM
ADHESIVE TO LINER: 1 to 25N/25MM
FINISH / COLOUR: Silver
TEMPRESISTANCE: -30+120°c
DIMENSIONS: 75mm x 45m
PRODUCT CODES: Aluminium Foil Tap

Key Benefits

Fire tested as a system with FIREFLY Membrane WP and NB
Easily applied with PE coated release liner
High take adhesive 
High temperature peel adhesion 
Temperature resistance up to 120°c

Product Data Sheet Links

Firefly Foil Tape Data Sheet

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.