Interzinc 52 Primer

Interzinc 52 primer, Epoxy Zinc-Rich for structural steelwork

A two component, metallic zinc-rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.

Typical thickness:                 50-75 microns dry, 85-127 microns wet
Coverage:                                7.90m²/litre at 75 microns d.f.t and stated volume solids
                                                   315 sq.ft/ US gallon at 3 mils d.f.t and stated volume solids.
Volume Solids                        59%
Packaging:                             10 Litre containers.
Colours Available:                 Grey
Gloss Level                             Matt
Method of Application          Airless Spray, Air Spray, Brush, Roller

Drying Times:

Temperature          Touch Dry               Hard Dry           Minimum           Maximum
5°C (41°F)               2 hours                    10 hours           8 hours              Extended¹
15°C (59°F)             90 minutes              6 hours            4 hours              Extended¹
25°C (77°F)             75 minutes              4 hours            3 hours              Extended¹
40°C (104°F)           45 minutes              2 hours            2 hours              Extended¹

Product MSDS Grey Part A
Product MSDS Tropical Part B     
Product Safety Advice Sheet                                                    

Product Data Sheet

Carriage for this product is calculated by weight and is shown in the checkout area.

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.