Firechief BPR3/K40 1.2 x 1.8m Fire Blanket, Rigid Case
This Firechief 'POD' 1.2m x 1.8m fire blanket is a durable single-piece moulded design with an opening at the base for the blanket to be pulled out of.
Intumescent Fire Vent Duct Sleeve up to 2 hour FEATURES & BENEFITS CE Marked Tested to BSEN 1366-3: 2009 Tested with Uncapped/Uncapped (U/U) duct configurations as required for ventilation ducts Up to...
Firechief BPR2/K100-P 1.2 x 1.2m Fire Blanket, Rigid Case
This Firechief 'Rigid Case' 1.2m x 1.2m fire blanket is a durable single-piece moulded design with an opening at the base for the blanket to be pulled out of. The K100 cloth is a double sided white silicone...
Base: nylon Fixing: concealed, recessed pulls with multi-purpose screws, finger pull for front of door with silicone or adhesive Version: Pocket door set Rosette shape: Rosette shape round (rounded) Material:...
HOPPE Pocket door set M472 Copper/ polished Fixing: concealed, recessed pulls with multi-purpose screws, finger pull for front of door with silicone or adhesive Solid brass Version: Pocket door set Rosette...
HOPPE brass pocket door set 5: Base: nylon Fixing: concealed, recessed pulls with multi-purpose screws, finger pull for front of door with silicone or adhesive Rosette shape: Rosette shape round (rounded)...
Quelfire QRS220/90SS Slim Vent Duct Fire Sleeve rectangular (60 min)
Vent Duct Slim Sleeve CE MARKED up to 60min fire rating FEATURES & BENEFITS CE Marked Tested to BSEN 1366-3: 2009 Tested with Uncapped/Uncapped (U/U) duct configurations as required for ventilation ducts...
Firetherm Intucollar - 160mm Designed to maintain the fire resistance and seal plastic (PVC-U, PP, PE, HPE & ABS) combustible pipes as they pass through fire compartment walls and floors. Under fire conditions,...
160mm Nullifire FP170 Pipe Collar Benefits Up to 2 hours fire resistance Surface mounted system Lightweight and easy to install Design allows for thermal movement of the pipe Fixing brackets mechanically...
FOR RENDERING BRICK, STONE, CONCRETE AND BREEZE BLOCK FIREPLACES Vitcas Fireplace Render is a fine cement-like material which provides a protective rendering for vulnerable materials which can be damaged...
QB50 QuelStop Ablative Coated Mineral Wool Fire Batt is a coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services. Features...
9 Litre Water Fire Extinguisher Water fire extinguishers are effective at cooling burning material by absorbing heat. Only suitable for Class A (solid burning) fires and can be used on wood, paper, textiles...
Firebreak 22 Fire Resistant & Acoustic Sealant 5L Brush Grade
5L Brush Grade Firebreak 22 is an easy-to-apply, highly flexible polymer emulsion sealant designed to provide fire protection wherever internal low movement and/or acoustic joints are required. When exposed...
Firetherm Intubatt 3 1200x600x100mm Intubatt 3 is supplied pre-configured, ablative coated on a single side and factory cured fire batt. Intubatt 3 is a strand and binder orientated rock fibre compressible...
Intubatt 3 - 1200x600x100mm. Is supplied pre-configured, ablative coated on a single side and factory cured fire batt. Intubatt 3 is a strand and binder orientated rock fibre compressible slab, utilising...
Application Retro fit to bottom edge of acoustic timber or metal doorsets Fixing Screw-fixed Performance Meets smoke requirements BS 8214 Acoustically tested in accordance with BS EN ISO 10140-2 Standard...
9 Litre AFFF Foam Fire Extinguisher AFFF (Aqueous Film Forming Foam) fire extinguisher is particularly suited to combat liquid spill fires such as petrol, oil, fats and paints. It works by forming a frothy...
International GTA007 Thinners International Thinners and Equipment cleaner for alkyd and vinyl based products Specific gravity: 0.86 Volume Solids: 0% Typical shelf life: 2 years VOC (as supplied): 860...
5 Litre Tub. Used to repair damage to or bond to mineral fibre insulation Intubatts. Brush grade, medium viscosity paste, or low viscosity liquid containing acrylic emulsion, inert fillers and fungicide....
Nullifire FS712 Intucoat Brush Grade -Brush White - 5L
5 Litre Tub Brush Grade. FS712 Intucoat is a water-based acrylic coating and adhesive, which may be used in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3 as a bonding agent and a...