Once installed, Dorgard works by listening out for a continuous sound of 65 decibels or higher. Once this sound has been identified, after approximately 14 seconds Dorgard will release the fire door and...

The Dorgard SmartSound designed by Fireco is an innovative wireless fire door retainer device that allows you to hold open fire doors in a completely legal, quick and simple way.

FF197 is a modified, single component, fire rated polyurethane foam. FF197 is used to seal linear gaps throughout the fire rated areas of a building and has a Fire Rating up to 240 minutes. Only supplied...

Description Multicollar Slim is a 30 mm-high universal fire collar that consists of a stainless steel band made of 174 links and a high-quality inlay on a graphite basis. In order to achieve the desired...

Phoenix Firefly 10m x 1.3m Fire & Smoke Barrier - 120 minutes fire integrity Cavity Fire Barriers developed primarily for the Construction Industry are a flexible, lightweight and easy to install solution...

Horizontal 10m x 1.3m Fire & Smoke Barrier - 60 minutes fire integrity only. Introducing the Firefly Phoenix Horizontal, the ultimate solution for lightweight, flexible fire-rated smoke and flame barriers....

Available only within the UK Aithon F4X for use over AL20X is designed for indoors or outdoors. A water based topcoat paint. It is primarily for use with Aithon AL20X for timber fire protection providing...

Water-Based Intumescent Basecoat for Steelwork Intumescent coating to provide 60 minutes fire protection to internal structural steel. A water-based, white, thin film intumescent coating Nullifire has...

Intergard 269 Primer Intergard 269 primer, Epoxy for structural steelwork Intergard 269 is a fast drying two component epoxy primer that can withstand prolonged periods of weathering prior to overcoating....

FS719 HP Blue for CPVC has been developed specifically for CPVC materials.The product is a distinctive blue colour, for easy visual identification and traceability. FS719 is a unique sealant used to reinstate...

Intergard 251 Primer Intergard 251 primer, Epoxy for structural steelwork A two component epoxy anti-corrosive primer pigmented with zinc phosphate. Typical thickness: 50-75 microns dry, 79-119 microns...

20L - Pilot ACR is a one component physically drying acrylic coating. It has a semi gloss finish with good gloss retention. It is fast drying. It can be used direct to metal. To be used as topcoat in atmospheric...

Sherwin Williams Firetex FX5062 Intumescent Coating For Structural Steelwork Please see below for our bulk buying discounts Waterborne intumescent coating designed for internal structural steelwork Provides...

18.5L - SteelMaster 600WF is a waterborne, full EPA VOC compliant and advanced technology, fire protector. Designed to protect up to 60 minutes on a wide range of I section beams and columns. Will provide...

Promat's PROMATECT -H, a top-notch non-combustible mineral board designed for superior fire protection. Engineered with selected fibres and fillers, this off-white board is perfect for safeguarding concrete...

Intercure 200 Primer - 20 Litres Intercure 200 primer, Rapid Recoat Epoxy for structural steelwork A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology,...

20L - SteelMaster 120SB is a one component solvent based acrylic thin film intumescent coating. Independently approved for fire protection of structural steel exposed to cellulosic fire. Can be used as...

Firetex FX5120 Intumescent Coating For Structural Steelwork Waterborne intumescent coating designed for internal structural steelwork Provides up to 2 hours resistance Tested in accordance with UL 263...

SC602 is a single pack acrylic thin film intumescent basecoat for the protection of internal and semi-exposed structural steelwork. SC602 is designed for on-site application by airless spray, optimised...

Available only within the UK Market. Intu Paint for Timber Description A water based intumescent paint used for timber fire protection providing a superior finish to its rivals for indoor applications....

SC601 is a single pack, solvent-based acrylic thin film intumescent steel coating for the protection of structural steelwork, optimised to provide 60 minutes fire resistance. After suitable drying, SC601...