Solvent-borne A solvent-borne durable gloss finish for use over suitably prepared interior and exterior joinery and metal work. Full Gloss has excellent opacity and film-build, gloss and colour retention....

Firetherm Intucollar - 110mm Designed to maintain the fire resistance and seal plastic (PVC-U, PP, PE, HPE & ABS) combustible pipes as they pass through fire compartment walls and floors. Under fire conditions,...

110mm Nullifire FP170 Pipe Collar Benefits Up to 2 hours fire resistance Surface mounted system Lightweight and easy to install Design allows for thermal movement of the pipe Fixing brackets mechanically...

This Firechief 'Rigid Case' 1.1m x 1.1m fire blanket is a durable single-piece moulded design with an opening at the base for the blanket to be pulled out of. The K100 cloth is a double sided white silicone...

CE Marked Up to 4 Hours Features & Benefits Tested to BSEN 1366-3: 2009 Classified according to EN 13501-2: 2007 + A1: 2009 CE Marked Up to 4 hour fire rating Suitable for PVC, PVC-U, PE, HDPE, MDPE &...

125mm Firebreak FX300 Pipe Collars are designed to maintain the fire resistance of floor and walls when penetrated by plastic pipes and metal and plastic pipes with continuous combustible insulation. Under...

This Firechief 'Soft case' of this 1.1m x 1.1m fire blanket makes for a very straightforward and simple fire blanket design. The blanket is held in by a Velcro strap which releases when the blanket is...

Firetherm Intubatt 1200 x 600 x 50mm board providing up to 4 hours fire rating Description Firetherm Intubatt 2 is a factory finished, unique multi-layered, low resin bonded, rock mineral fibre board....

Intubatt 2 - 1200x600x50mm - Fire Barrier. A lightweight up to 4 hour fire barrier comprising of a rock mineral fibre board with an elastomeric, ablative water-based sealant. FB750 Intubatt is designed...

A 2-component polyester filler paste Designed to repair damaged body panels on vehicles Can be used to fill either minor scratches or serious dents Can be used on bare steel and original paint...

Masonry Screw Pan Torx Drive 6 x 100mm - Box of 100 is your go-to solution for secure and reliable fixings! Perfectly designed for pattress fitting QuelStop Fire Batt to concrete, these screws are made...

1200x600x50mm - Firebreak Batts are stone mineral wool boards coated on both faces with a flexible fire resistant ablative coating. They are used to form fire and smoke stop seals able to reinstate the...

Stopseal Putty Non-Setting Intumescent Putty Stopseal Putty is a solvent free putty for fire barriers up to 4 hours. It is designed as a joint filler and sealer for use in penetration seals. Stopseal Putty...

Intumescent Fire Vent Duct Sleeve up to 2 hour Duct Size 100mm Ø QRS110 - Length 180mm Features & Benefits Tested to BSEN 1366-3: 2009 Tested with Uncapped/Uncapped (U/U) duct configurations as required...

Intumescent Fire Vent Duct Sleeve up to 2 hour FEATURES & BENEFITS CE Marked Tested to BSEN 1366-3: 2009 Tested with Uncapped/Uncapped (U/U) duct configurations as required for ventilation ducts Up to...

1200 x 600 x 50mm Ablative Coated Batt is the ultimate mineral wool insulation solution! With a high-performance ablative coating on both sides, this product has been rigorously tested as part of the Rockwool...

20kg Firebreak Compound is a specially formulated single pack material that is mixed with water to provide a strong and robust fire resistant smoke stop seal. It is designed to reinstate the fire resistance...

This Firechief 'Soft case' of this 1.2m x 1.2m fire blanket makes for a very straightforward and simple fire blanket design. The blanket is held in by a Velcro strap which releases when the blanket is...

HR-Prof Clear Flame Retardant For Timber HR-Prof is suitable for internal and external timber. It has non-flammable properties which restrict ignition and the spread of flame. The product is easy to apply,...

This Firechief 'POD' 1.2m x 1.8m fire blanket is a durable single-piece moulded design with an opening at the base for the blanket to be pulled out of.

Intumescent Fire Vent Duct Sleeve up to 2 hour FEATURES & BENEFITS CE Marked Tested to BSEN 1366-3: 2009 Tested with Uncapped/Uncapped (U/U) duct configurations as required for ventilation ducts Up to...