Firefly Collaroll
FFC10
£153.50 inc. tax

£127.92 ex. tax
? Tax based on United Kingdom.
Firefly Collaroll Summary

Firefly Collaroll

10m x 300mm roll Penetration Management

The Firefly Collar is supplied in 10 metre lengths, is suitable for multiple penetrations and can be cut to exact size.

A fully tested penetration management system used in situations where penetrations or multiple penetrations pass through a Firefly barrier via gaps made by pipes, wires and cables. The Collaroll sits flush against the barrier to provide a complete seal from fire and smoke.

Firefly Collar

The FIREFLY Penetration Management system is a fully tested system, which offers a solution to maintain the integrity of the FIREFLY barrier, where services and pipes penetrate the barrier.

All penetrations above 12mm in diameter must be collared, those below 12mm in diameter, can be sealed using the FIREFLY High Temperature Adhesive.

Penetrations should be collared on one side only apart from timber, which should be collared on both sides.

The FIREFLY Collar is supplied in a 10 metre roll, 300mm in depth. The FIREFLY Collar is easily recognised as its a bright green in colour, and is only suitable for use with the FIREFLY Fire Barrier System.

Cut the collar to size, enough to feed around the penetration, and staple together at 80mm maximum centres, using 12mm staples.

Each collar has a flange sewn on to it, which when installed, sits flush up to the barrier. The flange can be sealed to the barrier by stapling if its possible and then sealing with the FIREFLY High Temperature Adhesive, using 2 beads along the perimeter.

For plastic pipes, a proprietry product should be used.

For more detailed information please click on the Firefly Installation Drawing Catalogue Issue 3 below.




FIREFLY INSTALLATION DRAWING CATALOGUE ISSUE 3

Brand:
Firefly
Product Condition:
New
Product Added to your Cart
x

-------- OR --------